Lacquer ХП-734 “Abrin”
(lacquer on the basis of chlorosulphonated polyethylene and chloropolyethylenes)


Product description

The lacquer ХП-734 is a solution of chlorosulphonated polyethylene in aromatic hydrocarbons with the introduction of target additives.

Depending on the intended use, the lacquer ХП-734 is produced in three versions: type А - superior quality and first class quality, type Б, type (trade mark) “Abrin”.

Application area

Type А – applied as a raw material for the manufacture of anticorrosion enamels, as a component of face paints as well as for manufacturing prime coating for concrete.

Type Б - applied as a modifying component for mastic compositions and for other purposes.

The products of the trade mark “Abrin” are applied:

  • as a raw material for producing both one-component and two-component anticorrosion enamels and prime coatings, mastic compositions as well as for the manufacture of fire protection compositions and other purposes;

  • for waterproofing works, for the organization of various waterproofing types indepently or in a kit with the enamels “Abrin”, enamels ХП-799 МЧ and mastics on the basis of chlorosulphonated polyethylene;

  • for waterproofing at the organization of automobile bridges, tunnels,overpasses, underground passages and erections with increased requirements on water tightness;

  • in combination with other special materials for waterproofing of reinforced-concrete structures, reservoirs, basins, galvanic tubs as well as for waterproofing works at the objects contacting with potable and technical water;

  • for manufacturing a sealing sublayer in the system of continuous-pour floors;

  • for roof works in combination with the mastic “Abrin” and traditional waterproofing and roll materials as well as for the construction of light rolled roofs with decreased inflammability, having the properties of flame non-propagation along the roof surface, for the increase of existing roof longevity and for the protection of the enclosing and bearing construction structures of buildings and erections.


Key technical indicators

Indicator name

Value for the trade mark

Test method




Superior quality

First class quality

1   External lacquer appearance:

 а) Lacquer colour

Homogeneous solution, from light yellow to light brown

not standardized

Homogeneous solution, from light yellow to light brown

according to 5.3 of the present technical conditions

 б) Value of foreign particles, um, not more


not standardized


under GOST 31973 and 5.4 of the present technical conditions

2 Relative viscosity at the temperature (20.0±0.5), sec:

- with the viscometer B3-246 with the nozzle diameter 6 mm,

55, not more

60, not more

120, not more

not standardized

under GOST 8420 and 5.5 of the present technical conditions

- with the viscometer B3-246 with the nozzle diameter 4 mm

not standardized


3 Drying time at the temperature (20±2)°С, hours, not more

- to the degree 2



not standardized

under GOST 19007 and 5.6 of the present technical conditions

- to the degree 3

not standardized


4 Weight fraction of non-volatile substances, %

17, not less than

15, not less than


under GOST 31939 and 5.7 of the present technical conditions

5 Weight ratio of chlorine expressed as dry chlorosulphonated polyethylene, %



according to 5.8 of the present technical conditions

6 Weight ratio of sulphur expressed as dry chlorosulphonated polyethylene, %


1,3, not more

according to 5.8 of the present technical conditions

7  Moisture presence

Absence of visual splitting into layers

according to 5.9 of the present technical conditions

8  Adhesion, points, not more

not standardized


under GOST 15140, section 2 and 5.10 of the present technical conditions


it is permitted to increase the lacquer viscosity during the warranted storage period up to 25 % of the standardized value;
it is permitted to apply turpentine as the lacquer solution stabilizer and regulator.


User manual

  • Clean, remove dust and fat from the surface.
  • Before application it is necessary to thoroughly mix until the solution is homogeneous.
  • Apply mechanically, with the help of a brush or roller. It is possible to apply airless spraying.
  • Intermediate drying between layers - at least 3 hours, time of complete coating polimerization – 21 days.

Air temperature at the application should be at least -30°С, relative humidity should be not more than 85%.

It is necessary to use personal protection equipment - gloves, glasses and respirator.

Transportation and storage

Transportation and storage of the lacquer - under GOST 9980.5.

The lacquer should be stored in a leak-tight tare inside a closed room or under roof far from heating units, protected from atmospheric moisture and direct sunlight at the temperature from minus 40°С to plus 40°С.

Safety precautions

All the works relating to lacquer mixing should be produced in the rooms equipped with a forced ventilation (local and general suction-and-exhaust ventilation) or in the open air.

The presence of open flame sources and spark formation in close proximity to the place of painting works and works on lacquer mix is not allowed.

At the work with the lacquer one should use special clothes and shoes, PPE for arms - rubber gloves, respiratory organs - respirator RPG - 67A or the respirator ShB-1 “Lepestok-40”, for eyes protection it is necessary to apply protective glasses.


Warranted storage period - 6 months since the date of manufacture.


ИНН 7430022739, КПП 745301001, ОГРН 1157430000640, ОКПО 34549080
Р/С 40702810904000009845 УРАЛЬСКИЙ ФИЛИАЛ АО "РАЙФФАЙЗЕНБАНКА" Г. ЕКАТЕРИНБУРГ, К/С 30101810100000000906, БИК 046577906
Legal address: 454126, Russian Federation, Chelyabinsk region, Chelyabinsk, Smirnykh str., house 7, office 7

© 2020 Limited liability company “Ural-Polimer-Lak”