Concrete and reinforced concrete protection


Description of Abrin material application

The system of coatings on the basis of the materials “Abrin” is applied for the anticorrosion protection and decorative coating of reinforced-concrete, concrete and plastered surfaces. The system consists of the lacquer “Abrin” for treating a superficial concrete layer, clogging the present pores and improving adhesion and one or several layers of the enamel “Abrin”.

The service life of the coating is 20-30 years depending on the coating operation conditions.

Advantages of protective coverings on the basis of the Abrin materials: 

high elasticity and crack resistance;

chemical resistance towards vapor&gas medium containing acid gases (Cl2, HCl, SO2, SO3, NO2), forming acid solutions, alkali and salt solutions;

high adhesion to various surfaces.

Description of Abrin material application

  • surface preparation (cleaning the surface from impurities, crack filling, filling of honeycombs and irregularities, dust and fat removal from surfaces);
  • treating the superficial layer with impregnating solutions;
  • applying a coating layer of the Abrin lacquer;
  • applying a necessary number of protective layers of the enamel “Abrin”.

For the application of lacquer&paint coatings the companies use the units of airless and air spraying, the application with a roller and brush is also possible.

The temperature of ambient air, the surface and the material at the application should be from -15°С to +35°С. Relative humidity - not more than 75%. Drying period – 5-6 hours after application.


ИНН 7430022739, КПП 745301001, ОГРН 1157430000640, ОКПО 34549080
Р/С 40702810904000009845 УРАЛЬСКИЙ ФИЛИАЛ АО "РАЙФФАЙЗЕНБАНКА" Г. ЕКАТЕРИНБУРГ, К/С 30101810100000000906, БИК 046577906
Legal address: 454126, Russian Federation, Chelyabinsk region, Chelyabinsk, Smirnykh str., house 7, office 7

© 2020 Limited liability company “Ural-Polimer-Lak”