Metal structure protection


Description of Abrin material application

To provide anticorrosion and chemical protection of metal structures, one can apply a system of protective cover consisting of the prime coating and enamel “Abrin” Coating is applied on steel, zinc-plated, aluminum and other metal structures.

The covering systems on the basis of lacquer&paint materials “Abrin” are applied to protect:

  • the equipment operated in aggressive media (“strong” solutions of acids and alkali, salt solutions, marine water);
  • metal structures operated in atmosphere conditions and inside the rooms;
  • external surfaces of pipelines and reservoirs;
  • bridge metal structures and electricity pylons.

The system of protective cover “Abrin” is operated in the range from -60°С to +130°С (higher than +100°С – for a short period).

The coating service life is 6-8 years in highly aggressive media and 8-12 years in medium aggressive media, in atmospheric conditions and low aggressive media the service life extends up to 20 years.

Description of Abrin material application

A surface should be dry, clean and free from foreign matters preventing adhesion. Steel surfaces should be thoroughly cleaned, manually or with the help of electrical tools (up to the degree St2 according to ISO 8501-1:2007). In hard-to-reach places it is permitted to leave strongly bonded rust not more than 50 mm.

The temperature of ambient air, the surface and the material at the application should be from -15°С to +35°С.

Relative humidity - not more than 75%. The temperature of the coloured surface should be by 3°С higher than the dewpoint temperature.
Before the application it is necessary to hold the materials at the temperature 15°С - 20°С for 8 hours and thoroughly mix.

A recommended application method: air or airless spraying units. The materials should be applied with the help of brushes in hard-to-reach places.



ИНН 7430022739, КПП 745301001, ОГРН 1157430000640, ОКПО 34549080
Р/С 40702810904000009845 УРАЛЬСКИЙ ФИЛИАЛ АО "РАЙФФАЙЗЕНБАНКА" Г. ЕКАТЕРИНБУРГ, К/С 30101810100000000906, БИК 046577906
Legal address: 454126, Russian Federation, Chelyabinsk region, Chelyabinsk, Smirnykh str., house 7, office 7

© 2020 Limited liability company “Ural-Polimer-Lak”