Description of Abrin material application

Waterproofing on the basis of bitumen materials has a set of drawbacks, which include short life and problematical nature of its application (the temperature should be approx. 120°С). There is a more sophisticated solution - polymer-based materials. They are much stronger and simpler in their application.

To protect reinforced-concrete tanks, reservoirs and other embedded structures with various intended uses, our plant developed and frequently applied technical solutions on waterproofing of such objects (sewage treatment facilities, plating industries, metallurgical manufacturing facilities, etc.).

A system of coatings for reservoir waterproofing is completely made from the materials produced by our plant. A system of paint-and-lacquer materials includes: grease removers (based on aromatic solvents, ketones and alcohols), polymeric treatments (lacquer coatings), mastic composite mixtures, enamels for finishing coats.

Protective coatings on reinforced-concrete structures’ water-proofing have been applied for: 

  • protecting the reinforced-concrete composite tanks for waste treatment facilities of industrial wastes of POLIEF, OJSC, the Republic of Bashkortostan.
  • protecting reinforced-concrete structures of the room and basement of the electrolythic workshop of Chelyabinsk Zinc Plant;
  • waterproofing of the tanks of drinking water pipeline at the brewing plant “Ivan Taranov Breweries”, CJSC, Novotroitsk;
  • waterproofing of the tanks of industrial wastes at OJSC “Uchalinskiy Mining and Processing Works”;
  • waterproofing of the mass basin at the TVDP workshop at Pulp and Paper Plant, Cherepovets, and other facilities.

Before being applied at industrial enterprises, a system of protective coatings on the basis of chlorosulphonated polyethylene was being tested in the laboratory of the Chair “Construction Materials” of South Ural State University for 8 years.

Description of Abrin material application

To form a high-quality waterproofing layer, it is very important to conduct proper surface preparation. It is necessary to eliminate all the sections, affected by corrosion, oily and dirty spots. Cracks and corrugations are mended with cement&sand grout.


ИНН 7430022739, КПП 745301001, ОГРН 1157430000640, ОКПО 34549080
Р/С 40702810904000009845 УРАЛЬСКИЙ ФИЛИАЛ АО "РАЙФФАЙЗЕНБАНКА" Г. ЕКАТЕРИНБУРГ, К/С 30101810100000000906, БИК 046577906
Legal address: 454126, Russian Federation, Chelyabinsk region, Chelyabinsk, Smirnykh str., house 7, office 7

© 2020 Limited liability company “Ural-Polimer-Lak”